8 ft. linear fire trough. CSA certified (USA and CANADA) Fire trough is completely assembled and ready for installing in a outdoor approved enclosure. Electronic ignition burner system includes: Stainless steel burner, pan, hot wire ignition, wall switch.
Dimensions:
Pan opening: 96" L x 5" W
Pan Lip: 1 1/2"
Pan w/ Lip: 99" L x 8" W
V-shape pan depth: 2 1/2"
Technical:
- 200,000 btu's/hr
- Premium 304 stainless steel, 1 mm wall thickness
- Hot wire ignition suitable for outdoor conditions
- 16 gauge stainless steel components designed for use in harsh coastal environments
- Convenient gas and electrical connections provided at base of valve box. Requires 120 Vac
- Natural gas supply pressure: Minimum 5” W.C; Maximum 7” W.C)
- Propane gas supply pressure: Minimum 10” W.C; Maximum 11” W.C)
- Complete assembly height: 13 ½” (6” minimum clearance required under valve box)
Warranty: 3 years on stainless steel burner, pan, and valve box. 1 year on electrical components
When not in use the fire pit must be covered
Fire Glass & Lava Rock Application:* Natural Gas Burners recommended media size: Fire glass (1/4" - 2"), lava rock (2" or larger)
* Liquid Propane (LP) Gas Burners: Fire glass or crushed lava rock must not cover burner holes
*
LP Gas Warning: Applying fire glass or crushed lava rock (2" or smaller) in excess of 1/4" on top of burner may result in unburned gas pooling in pan and within fire pit.
* LP gas burners recommended media: Large lava rock (2" or larger)
Planning & Design:
- For use in outdoor approved locations only
- Install proper size gas line based on BTU’s of appliance. Undersized gas line will result in inadequate flame appearance
- Do not install corrugated or ribbed gas lines. Flexible gas line can result in a whistling sound during operation
- Maintain proper clearances. 48” from sides surrounding fire pit
- Not approved for use under ceiling or overhang
- System includes a standard on/off switch which a qualified electrician can install
- Enclosure must incorporate two air vents. Minimum of 16” square inches on each side of pit
- Enclosure may require more ventilation based on material, size and use
- Flame Creation, LLC offers a full line fire pit frames designed to accept burner assembly
All information provided is for general information only. Designing, installing, and servicing of any gas burner and fire feature must be performed by a qualified professional and gas supplier. Installations must conform to local codes or in the absence of local codes refer to the National Fuel Gas Code (ANSI Z223.1 or CAN/CGA 8149.1), National Fuel Gas Installation Code, Propane Installation Code or CAN/CGA B149.2
Sales and Technical 770-335-2405
$3,195.00 $3,550.00
