null

30" High Capacity Penta Burner Kit

$320.00
(No reviews yet) Write a Review
30" high capacity cluster burner kit which includes 3/4" valve, key, decorative valve cover, 3/4" gas pipe elbows.
SKU:
FT-FPS30CB-A

30" Penta Burner Kit
Product In Stock!

Unique 5 petal design creates a uniform and full flame appearance. Available in natural gas or propane gas for convenient match lit operation.

Gas Fire Ring Kit Includes: Fire ring, high capacity valve, key, decorative valve cover, 3/4" gas pipe elbows

Technical
:

  • 250,000 btu's/hr
  • Premium 304 stainless steel 
  • Tubing is angled in center hub to prevent water from entering gas supply
  • 3/4" FIP located in center hub of burner
  • Maximum gas pressure requirement:  Natural gas (7" wc, 1/4 psi), Propane gas (11" water column, 1/2 psi)
  • LP conversion fitting is designed to reduce sooting and improve flame appearance
  • Do not use corrugated gas lines from source to fire feature or you may experience a whistling noise during operation

Options:

  • Whisper flex gas line: provides convenient gas connection
  • Fuel type: Choose between natural or propane gas
  • Key length: Make sure key is larger than the width of your fire pit wall

Buyers Guide For Natural Gas Burners

  • Install fire glass approximately 1 1/2" over burner

Buyers Guide for Liquid Propane (LP) Gas Burners

  • Do not install more than 1/4" of glass or small lava rock above burner holes.  Do not block burner holes
  • Large lava rock (3" or larger) and gas logs can be used as long as burner holes are not blocked
  • Due to sooting (a residue which occurs from LP gas burning) consider using black glass rather than colored glass
  • When designing and constructing fire feature be sure to provide adequate ventilation

Important!

  • LP gas is a heavy gas. Applying too much media over burner holes may create back pressure and gas leakage resulting in gas pooling in fire pit.
  • A minimum of two ventilation openings 18 sp. inches each and orientated 180 degrees apart must be installed at base of enclosure for LP gas fire pits.
  • All information provided is for general information only.  Designing, installing, and servicing of any gas burner and fire feature must be performed by a qualified professional and gas supplier.  Installations must conform to local codes or in the absence of local codes refer to the National Fuel Gas Code (ANSI Z223.1 or CAN/CGA 8149.1), National Fuel Gas Installation Code, Propane Installation Code or CAN/CGA B149.

Additional products available from Flame Creation, LLC

"STRIVING TO BE YOUR FLAME SOURCE HEADQUARTERS"

All information provided is for general information only.  Designing, installing, and servicing of any gas burner and fire feature must be performed by a qualified professional and gas supplier.  Installations must conform to local codes or in the absence of local codes refer to the National Fuel Gas Code (ANSI Z223.1 or CAN/CGA 8149.1), National Fuel Gas Installation Code, Propane Installation Code or CAN/CGA B149.2

Prop 65 warning (CA residence)


Trustpilot